Quick and Easy Tip for Connecting Wires – Wago Lever Nuts

In this video, I show you a neat little product called Wago Lever Nuts to help make connecting wires a snap. No soldering or crimping needed. The only tool required is a wire stripper. They are also simple to disconnect and can be reused. Handy for testing and troubleshooting circuits

They wouldn’t be suitable for outside use as they aren’t waterproof or for use on a wire that gets any movement or vibration, ie. Trailer brake wiring. But for many projects or mods around the RV, they could be a quick and convenient method of connecting wire versus solder, crimps or butt connectors.

Video Demo of Lever Nuts

Warning: The Lever Nuts shown in the video are not the name brand “Wago”. Caution must be taken as these may not be certified. Also as far as I can tell Wago Lever Nuts aren’t CSA certified for use in Canada but are commonly used in many other countries, especially Europe.

Using such an item without the proper certifications could affect your insurance and/or warranty. Here is a link to the Wago Global Certificates and Approvals web page – https://www.wago.com/global/certificates

See my Soldering Tips post and video

In this video, I show you a neat little product called Wago Lever Nuts to help make connecting wires a snap No soldering or crimping needed   https://www.loveyourrv.com/quick-and-easy-tip-for-connecting-wires-wago-lever-nuts/

Share this post with other RVers, thanks!