Aviation to XT90 Plug for the Bluetti 12VDC 30A Outlet

This post may contain affiliate links, meaning I get a commisson if you decide to make a purchase through my links. There is no addtional cost to you. See Affiliate Disclosure

In this video, I make a custom plug for my Bluetti AC300 portable lithium power station. The AC300 doesn’t come with a plug for the 30A 12VDC port. It’s an optional accessory, plus I also wanted one to work for my existing XT90 connections on my VIAIR 12V air compressor and my Flojet Macerator pump.

I purchased an Aviation-type male plug and soldered it to 10 GA solar cables and an XT90 plug. I also made up some test cables using 10 gauge marine wire, XT90 connectors, alligator clamps, and ring connectors. Stay tuned, as I will have a video out with some testing of the Bluetti AC300 12VDC 30 amp port in the future.

Parts Links:

Related Links:

Custom Built My Bluetti 30A 12V Output Plug - Aviation to XT90 Connector

Share the post

Xantrex Lithium Battery Ad

Shop Xantrex Store for Lithium Batteries