Tips & Advice for Wintering in an RV – BC Coast

This post may contain affiliate links, meaning I get a commisson if you decide to make a purchase through my links. There is no addtional cost to you. See Affiliate Disclosure

As winter approaches on the coast of British Columbia, Canada, full-time RV living demands preparation to stay warm, dry, and comfortable through the cold, wet months ahead. Whether you’re a seasoned snowbird or new to coastal winter RVing, these videos offer tips to help you (and your rig) survive when the temperature drops.

Prepping the RV for Winter Skirted Photo

In this Winter Prep video series, I share practical, real-world steps I’m taking with my fifth-wheel trailer on Vancouver Island, from hooking up a heated fresh water hose and water regulator, to installing reusable EZ Snap RV skirting with a PVC-weighted base, building a protected under-trailer storage shed with a zippered door, and finally optimizing the interior with insulation film, dehumidifiers, safe space-heater strategies, and thermal imaging for spotting heat loss and electrical issues.

Winter Prep Part 1 – Fresh Water Hose Feed

In this part 1 video, I begin a video series detailing my preparations for spending the winter on the coast of British Columbia, Canada. First up is to hook up my automatic heated fresh water hose from Camco. I also attached a water regulator, AC vinyl cover, and set up my sewer hose support. In part 2, I will begin installing my EZ Snap RV skirting.

Winter Prep Part 2 – Attaching the EZ Snap RV Winter Skirting

In part 2 of my winter prep series here on Vancouver Island, I show how I set up my skirting. I use EZ Snap skirting. The first time I used it, I needed to attach all the snaps and cut the material to fit, but now that it’s done, attaching was a snap! To hold the bottom of the skirting in place, it gets tucked under a grid of connected PVC irrigation piping.



Winter Prep Part 3 – Built Skirted Shed under the Fifth Wheel

In Part 3 of my wintering in an RV on the BC coast series, I show how I built a small shed under the front overhang of the fifth wheel trailer. I first built a custom frame out of 2×2 lumber screwed together. Then I installed the special EZ Snap kit that comes with a zippered door. (See product page) After the build, I give you a look inside the enclosure and provide a tip on using 3M No-Residue Tape to seal the top of the skirting.

Winter Prep Part 4 – Inside the RV Living Space

In part 4 of my prep series for a winter RV stay on the BC coast, we go inside our rig for more tips and advice. Included are window film, rugs, a dehumidifier, heaters, vent cushions, etc. A primary safety concern is overloading AC outlets with space heaters. Our RV has a max 30-amp service, but it’s not designed for a constant 30-amp load. So I show how I spread out the load using different circuits.

To increase safety, I don’t use the space heater on high (1500 watts); instead, I use the lower 800-1000W setting. I find another handy tool is my thermal imaging camera. With it, I can spot overheated electrical circuits or cold air leaking into the RV.

EZ Snap RV Skirting Tips – End of Winter Update

A quick end-of-winter update and a few tips I’ve found helpful for using EZ Snap RV winter skirting.

EZ Snap Website

EZ Snap Amazon Store

No-residue 3M Tape

1″ Pipe Clamps

10 Things that Help Us Winter in Our RV – Reviews & Updates

Share the post

If you like the website content, be sure to sign up for my *free* monthly newsletter. In it, I share a little more personal information about our journey as full time RV/Boaters, links to the latest Love Your RV and Boat! posts/videos, and some other helpful bits and pieces.